After enduring the fourth nor’easter this month, I needed a little QRP-portable fix. Unfortunately, my bike is in the shop for repairs and the ground is saturated from melting snow, so I opted for quick trip to a local park and operated from the truck.
Charlestown Park is a beautiful community park just down the road from my home. I hadn’t operated from there in a while, so it was an ideal spot for a quick outing.
As I was setting up, a curious passerby walked up and asked about the 20-foot Black Widow pole I was getting ready install on the truck. I explained that it was a ham radio antenna. He watched to see how I mounted the pole then resumed his walk.
My location in Charlestown Park.
Once again, I focused my efforts on making SKCC contacts. I started off on 40M and added a few new members to my log. On 30M I had two 2xQRP contacts. One with W9ILF in Indiana and one with KI4KGK in Georgia who was running 1 watt.
As I was operating, a security officer cruised by looking at my antenna. He drove down the road a bit and turned around. He slowed down in front of me, probably getting ready to approach me. I waved to him and he waved back and drove off. I guess he was satisfied that I wasn’t doing anything nefarious.
On 20M, I received a nice signal report from VE4MG in Manitoba. He was very strong into Pennsylvania. I made one more contact on 40M before packing up.
Today was a nice break from the snow we had this week but I’m looking forward to some warmer weather. Hopefully, it’s not too far off.
Despite all the bad weather lately, we managed to get a weekend’s worth of half-decent weather. So, I brushed the cobwebs off my bike (literally) and went out for a spin on one of my favorite trails.
I rode the Schuylkill River Trail from the Oaks Trailhead up to the Perkiomen Trail and stopped in the Lower Perkiomen Valley Park for some bicycle-portable QRP. I parked next to a convenient bench and set up my KX3.
I did some experimenting with a mount I made to use my bike as a support for my portable vertical. That didn’t work out as planned so I ground-mounted my 19-foot vertical next to my bike, using a screwdriver shoved in the ground.
My setup in Lower Perkiomen Valley Park. The white object on the ground is a Dollar Store cutting board. The ground was soft so I used the cutting board under the kick stand to stabilize the bike.
I started off looking for some SKCC QSOs on 40M but there wasn’t much activity there. I moved up to 30M and KO5Q in Georgia answered my CQ. After I finished chatting with Roger, I moved up to 20M and found W0RT in Kansas. Immediately after I signed with Rick, I got a call from a very loud NA3AR. Tony was just a few miles away in nearby Collegeville. That accounts for his very loud signal.
By the time I finished up with Tony, the wind had picked up and it was starting to get cold. So, I packed up the bike for the ride back to the trailhead.
It sure felt good to get out on the bike today. I’m a member of the Rails to Trails Conservancy, so I’m making it a point this year to explore more local trails with the bike. There will definitely be more bike-portable operations in my future.
They were forecasting some rain and snow for the late afternoon today, so I decided to squeeze in a trip to Valley Forge Park before it started. I have already met my WWFF-KFF quota from this park, so I concentrated my efforts on making SKCC contacts.
It was chilly but sunny when I rolled into the Park. I quickly set up my 19-foot Vertical on the back of the truck and fired up the KX3. I spotted my 40M frequency on the SKCC Sked Page and I was soon met with some callers. I had seven contacts in the log before things thinned out. I moved up to 30M and worked two more stations there. The clouds were starting to roll in (and the restrooms were closed for some reason), so I decided to pack up and head home.
My location at Valley Forge. The National Memorial Arch is in the background. I took this right before I left for home.
I ended up with 9 SKCC contacts. Four of those are new numbers I need for the Tribune x5 level. As a bonus, I also made 3 two-way QRP SKCC contacts. It was a brief outing today but I had fun.
As I write this, the snow has started. Hopefully, I won’t have too much shoveling to do tomorrow.
I braved the chilly temperatures yesterday to operate in the annual Freeze Your B— Off (FYBO) contest. It’s always fun to get out for some QRP-portable but the contest itself left me cold (pun intended).
I went back to the same spot I used for my impromptu outing a few days ago. (Truth be told, I like this spot in the Winter primarily because it’s one of the few local parks that has a year-round Porta-Pottie.) I used my usual setup with the KX3 at 5 watts into my 19-foot vertical on the back of the truck. It was about 30° F outside with a steady breeze. Inside the truck, it was a balmy 35° F or so.
The WB3GCK QRP cockpit. (This picture was actually taken during Winter Field Day.)
There was a lot of contest activity going on but no specific FYBO activity that I could find. I worked several QSO party stations from Minnesota and Vermont. I was pleased with how well I was getting into Minnesota on 40M. I also received a very nice signal report on 20M from K5C, a Space Shuttle Columbia special event station in Texas. I ended up with 10 contacts in the log before my toes started going numb.
But where were the FYBO stations?
Ever since 2016, the FYBO rules include a “Work Anyone” rule. Since you can work other contests or participate in activities such as POTA and SOTA and submit those contacts as FYBO contacts, there’s no real incentive for anyone to actually call “CQ FYBO.” As a result, I didn’t hear a single FYBO station yesterday. For me, this rule takes the fun out of operating in a QRP contest.
Don’t get me wrong; I appreciate that the Arizona ScQRPions take the time and effort to run the contest. It’s just that, for me, part of the fun of a QRP field contest is working other QRPers. In this contest, that’s less likely to happen. In any event, it still gives you a reason to shake off that cabin fever and get out for some portable operating.
I had some free time today so I made a quick trip to a local park for some mid-week QRP-portable operating. My plan for today was to make some Straight Key Century Club (SKCC) contacts.
I started on 40M near the SKCC calling frequency. My first “CQ SKCC” call was met with an immediate response. I like when that happens. I worked four more SKCC members (including special event station, K3Y/1) and had a nice rag chew with a non-member in Georgia before moving to 20M.
My 19-foot vertical has worked like gangbusters for me on 40M but I haven’t spent much time on 20M with it. While on 20M today, I worked SKCC special event stations in Nebraska (K3Y/0), California (K3Y/6) and Oregon (K3Y/7). Not too bad for QRP from eastern Pennsylvania. I guess the vertical gets out reasonably well on 20M.
Upper Schuylkill Valley Park
After an hour and a half or so, I packed up and headed home to warm up (it was only 27° F today).
This was fun. I need to get out during the week more often.
I had every intention of doing something special for Winter Field Day (WFD) this year but Life-in-General got in the way. I hadn’t made any particular plans, so I decided to do a little operating from some local parks.
Day One
I drove out to nearby Upper Schuylkill Valley Park for a few hours on Saturday afternoon and parked in a spot with a nice view of the Schuylkill River. We were experiencing some above average temperatures this weekend (it was 55° F today), so I actually had my window rolled down.
My location at Upper Schuylkill Valley Park for Winter Field Day 2018
I set up my 19-foot vertical in the back of the truck and my KX3 in the cab of the truck just in time for the start of the contest. I operated in the Outdoor category (1O), running QRP CW only.
In just under 2 hours, I logged 21 stations on 40 and 20 meters. Part of that time was spent chatting with a curious passerby. I spent about 10 minutes talking about ham radio with him. After he left, I made a few more contacts before heading home for the evening.
Day Two
What a difference a day makes. On Sunday morning, I operated from Black Rock Sanctuary, just outside Phoenixville. While the temperature was still fairly moderate (47° F), it rained steadily all morning. I had to cover up my antenna components with plastic to keep everything dry.
My vertical antenna wearing its raincoat
The 40M band was in pretty good shape, so I spent most of my time there. I checked 20M once or twice but there was another contest going on and I didn’t hear any Winter Field Day CW activity.
Winter Field Day at Black Rock Sanctuary
After about 1.5 hours, I matched yesterday’s effort with another 21 contacts. I even dragged out the microphone (gasp!) and made 4 SSB contacts. One of the SSB contacts was with WW1USA from the World War I museum in Missouri. He was also giving out WFD exchanges.
WB3GCK hunkered down for Winter Field Day on a rainy Sunday morning
Overall, I worked 42 stations in 24 sections and 21 states. I’m certainly not a threat to win but I’m happy with the results of my meager effort. It was great to hear all the CW activity this year.
I didn’t spend a lot of time on WFD this year but it certainly was fun. Maybe next year I’ll do something more adventurous like Winter camping. We’ll see.
The loosely organized group of QRPers known as the Boschveldt QRP Club made their annual pilgrimage to the Mohican Outdoor Center (MOC) for a weekend of radios and tall stories. Each year we rent a cabin and use that as a home base for hiking and QRP-portable operating. This year’s participants included Ed WA3WSJ, Ed K3YTR, Ron WA8IYH, John NU3E, Glen NK1N, Walt KB3SBC, Bill KA3RMM and me.
We all arrived Friday afternoon and it wasn’t long before a couple of stations were set up in the cabin. Friday evening’s activities included lots of socializing and a great dinner prepared by Ed K3YTR. KB3SBC set up a small projector and we looked at some pictures from the many WA3WSJ/KB3SBC NPOTA activations. We also saw a preview of WA3WSJ’s upcoming NPOTA presentation at the Four Days in May (FDIM) gathering.
The Boschveldt QRP crew. Seated (L-R): K3YTR, WA8YIH and WA3WSJ. Standing (L-R): KB3SBC, WB3GCK, NK1N, NU3E and KA3RMM. (Photo by WA3WSJ)
The Club also had some door prizes, courtesy of Ed WA3WSJ. WA8IYH won a neat little QRPver 20M QRP rig. Other prizes included a QRPver antenna tuner, a set of Palm Mini paddles and a few other goodies. I was surprised when Ed presented me with a uBITX rig for making the most QSOs at past Field Days. (I later traded it to NU3E for the Palm Mini paddles.)
During the evening, we lost power to the cabin, including heat and running water. The Team channeled their inner MacGyver and collected rainwater for flushing toilets, firewood for the fireplace and battery-operated lights. Despite the sub-freezing temperatures outside, the cabin stayed remarkably warm through the night.
Ron WA8YIH inspecting the QRPver transceiver he won as a door prize.
On Saturday morning, KB3SBC and KA3RMM made a much-needed coffee and donut run. A few folks stayed behind at the cabin, while the rest of us drove up to High Point State Park. At 1803 feet above sea level, this is the highest point in the state of New Jersey. Since the rain from the night before was now ice, we opted to forego hiking on this trip.
WB3GCK operating from the cab of the truck.
The road up to the High Point Monument was closed and it was too cold and windy for hiking, so we stayed in the parking lots and operated from our vehicles. WA3WSJ did a Parks on the Air (POTA) activation. NK1N set up his portable satellite equipment to work the “birds.” I put my 19-foot vertical on my truck and operated in the SKCC Weekend Sprintathon (WES) contest. By this time, the temperature was in the teens with a wind chill in the single digits. Needless to say, putting up antennas was a real challenge. Despite the challenges, everyone had a successful day. After a few hours of operating, we packed up and made the hour-long drive back to the cabin.
Glen NK1N ready to work the “birds” at High Point State Park. My truck with my vertical is in the background.
On Saturday evening, power was restored to the camp and we all headed into town for a great dinner. The evening concluded with more tall stories and some more radio operating.
Ed WA3WSJ operating from High Point State Park.
On Sunday morning, we had a huge breakfast before packing up and heading out. John NU3E made his famous Belgian waffles, while Ron WA8YIH made some incredible omelets. Needless to say, our little group includes some amazing culinary talent.
After packing up and saying our goodbyes, we closed the book on another fun Camp Run-a-MOC weekend. We’re all looking forward to coming back again next year.
I wanted to get out and do a little QRP-portable before all the holiday festivities get started. I hadn’t operated from Black Rock Sanctuary in a while, so I headed over there. It was dreary and drizzly today, so it was a good day to operate from the truck and give my homebrew 19-foot vertical another workout.
The vertical antenna in use at Black Rock Sanctuary
Since the last time I used the 19-foot vertical in the truck, I found a way to ground the antenna to the body of the truck. It was a simple matter of backing out one of the screws that hold the bed liner in place and using it to attach a small L bracket. This now provides a convenient spot to attach my ground lead.
Ground connection for the vertical antenna.
I was using my little MS2 straight key with the KX3 today. The bands were in pretty decent shape and the antenna seemed to be working great. I made a half-dozen SKCC contacts on 40 and 20 meters with some respectable signal reports. One SKCC’er in California called me on 20 meters but the frequency was taken over by other stations. I wasn’t able to complete the QSO but at least I was being heard on the West Coast.
Operating position in the truck
I also had some nice two-way QRP QSOs. W4UV in North Carolina had a great signal on 40M with his Ten Tec QRP rig. Jim N0UR was really pounding in from Minnesota on 20 meters. My favorite QSO of the day was with Dirk W8IQX. Dirk was running 2 watts from his FT-817 to an AlexLoop on 20 meters. If I copied correctly, he was in Florida. QRP never ceases to amaze me!
Earlier this year, I built a lightweight, 19-foot vertical. Intended for tripod or ground mounting, I did the initial tuning and pruning of the vertical in that configuration. Today, I thought I’d see if it would work mounted on my pickup truck.
I have this plastic crate that I keep in the bed of the pickup truck. I use it to hold parts for my drive-on antenna mount, along with some tools and miscellaneous “stuff.” I hold the crate in place using bungee cords attached to a cargo bar that spans the width of the bed. I decided to make use of the crate as a quick and dirty antenna mount.
I took some 1-inch PVC pipe with a female threaded coupler from a previous antenna project and attached it to an inside corner of the crate with heavy-duty zip ties. I kept this part short enough to fit underneath the tonneau cover when traveling. To mount my 20-foot Black Widow pole, I used a 1-inch PVC male coupler and a reducer to go down to a 3/4-inch PVC pipe. The 3/4-inch PVC pipe fits nicely up inside the Black Widow pole. I went with the Black Widow pole rather than the lighter weight pole I normally use with this antenna since I already had all the PVC parts I needed to mount it.
My makeshift mount. The PVC mount is attached to the plastic crate, while the crate is attached to a cargo bar using bungee cords. The random junk I store in the crate keeps things stable.
I headed out to a local park today to give it a try. It only took a few minutes to get it set up. From the antenna, I ran some RG-8x coax through a window and into the cab of the truck. I connected the antenna ground to the body of the truck using a short piece of braid to a metal plate used to latch the tonneau cover closed.
The Black Widow pole installed on my makeshift mount.
I fired up my antenna analyzer and the SWR was off the charts. On closer inspection, I found the plate I was using for my ground wasn’t actually attached to the body of the truck. Instead, I connected two radials and ran them off the back of the truck. This time the SWR on 40 and 30 was much better. The resonant frequencies in this configuration were higher than when ground-mounted but my KX3’s internal tuner easily handled the minor mismatches.
I started out on 20 meters where this antenna operates as a random wire. I heard N5PHT doing a Parks on the Air (POTA) activation (KFF-3023) down in Texas. I gave him a call and exchanged reports. Moving down the band, I worked XE1XR in Mexico. So, the antenna seemed to be working fine. I checked 30 meters but it was devoid of activity.
The 19-ft vertical in operation.
Down on 40 meters, I had a nice ragchew with Bernard VE9BEL. Bernard was operating a club station (VE9CRM) in New Brunswick, Canada. He gave me a 599 and said I was “booming” into New Brunswick. Not bad for 5 watts into a 19-foot loaded vertical. I last worked Bernard a few years ago from Mt. Misery in Valley Forge National Park. We had strong signals both ways on that day, too.
So, it looks like this antenna is usable from the truck. I still need to find a way to connect the ground to the body of the truck. If possible, I’d like to avoid drilling holes in my new truck. This antenna is a little easier to deploy than my usual “Bike Rack Vertical.” The downside is I have to exit the truck to change bands. Life is a series of trade-offs, I guess.
I’m not much of a contester or DX chaser, so I decided to I decided to avoid the CQWW CW contest this weekend. It’s been awhile since I’ve done any digital mode stuff, so I thought I’d focus on that for a change.
We had some pretty good weather (for Pennsylvania in late November, that is) on Saturday, so I headed out to a local park to operate for a while. I set up my AlexLoop and KX3 in a little picnic pavilion. I also brought along my old Acer Aspire One netbook, which I converted to Ubuntu Linux a few years back. It only took a few minutes to get set up and get the loop tuned.
I started out on PSK-31. Although the band seemed a little flakey, I worked stations in Florida and Arkansas. I moved up the band a bit to see if there was any Olivia activity. I saw one station with a QSO in progress. I tuned up from him and called CQ for a while. No dice. I went back to the PSK-31 area and worked another Florida station. Towards the end of our QSO, my netbook gave me a “low battery” alert, so I quickly wrapped up and shut down for the day. (Note to self: It’s time to replace the battery in the netbook.)
Operating digital modes from a local park.
Back at home, I checked into the paNBEMS Net on 80 meters on Sunday morning. This is a state-wide digital net that makes use of the NBEMS suite of software (i.e., fldigi, flmsg and flamp). Here in Chester County, Pennsylvania, our local ARES-RACES group makes heavy use of NBEMS for emergency communications, so this net is always good practice. Even though I was running just 5 watts to my rainspout antenna, I was easily heard by the Net Control Station in northeastern Pennsylvania. Despite my S7-S8 noise levels on 80 meters, I was able to copy all the message traffic passed. The paNBEMS Net convenes every Sunday morning at 0800 Eastern time on 3585KHz (1500Hz on the waterfall). Message traffic is sent using MFSK-32 but various modes are used for check-ins. Today the net used Thor-22. So, make sure your RxID is on.
Message traffic sent on the paNBEMS Net. K3EUI relayed the message original transmitted by AJ3DI.
Following the paNBEMS Net, I fired up WSJT-X and tried the FT8 mode for the first time. I made my first-ever FT8 contact with VA3VF on 40 meters plus several others. Like the “JT” modes, I find the technology fascinating, however, I still tend to prefer more keyboard-to-keyboard interaction. That being said, I’ll still probably use it from time to time.
Finally, I did a little SWL’ing Sunday afternoon. I tuned into the Shortwave Radiogram digital broadcast via WRMI in Miami, Florida. I had seen announcements for these broadcasts on some of the ham radio mailing lists I subscribed to but never tuned in until today. They broadcast news articles and images at various times during the weekend. The broadcast I monitored at 2030 UTC was on 11.580MHz using the MFSK-32 mode. Over about 30 minutes, I had near-perfect copy on the text and good quality on the 4 images transmitted.
One of the images captured during the Shortwave Radiogram broadcast on WRMI in Florida. The broadcast was on 11580 KHZ, not 7070KHz, as indicated in fldigi.
It was a nice change of pace to spend some time on the digital modes this weekend but I still like CW the best.
The loosely organized group of QRPers known as the 
WB3GCK QRP Amateur Radio 