Crowded Activation at Valley Forge

I made a quick trip over to nearby Valley Forge National Historical Park (US-0761, KFF-0761) this morning. It almost didn’t happen, but it turned out to be a fun morning.

Located a few miles from my home, Valley Forge has always been one of my favorite places for QRP-portable operations. During the winter months, I usually operate from a trailhead away from the main areas of the park. When I rolled in this morning, I couldn’t believe how crowded it was. It’s usually a popular place, but this was different. The parking lot was full, with a few folks even parking on the grass. There were a few sizeable groups of hikers/walkers gathering, which accounted for the crowded conditions. I was about to leave, when a parking spot in the middle of the lot opened up. 

It was a beautiful, albeit windy, morning. I was hoping to get a spot where I could operate from the tailgate, but that was not to be. One of the hiking groups had occupied the only picnic table, so I operated “stationary-mobile” from the middle of the parking lot. I used my usual TR-35 (5 watts, CW) and 12-foot loaded whip. 

The bands were as busy as the parking lot I was in. There were a ton of hunters out on 40M, so I made my first 10 contacts in less than 10 minutes. After logging 20 contacts on 40M, I moved up to 20M, where it was just as active and produced some DX contacts. Same goes for 17M. After an hour and 20 minutes, I had logged 41 contacts, of which four were known park-to-park contacts. 

Some highlights from this morning:

• Working 10 European DX stations: Germany (3), Belgium (2), Slovak Republic (2), France, Poland, and Slovenia
• Working three of my fellow Polar Bear QRPers: VE3DN, VA2NW, and VE3WMB (P2P)
• Getting calls from a couple of fellow QRPers I haven’t worked in a while: Dave K1SWL and Fred KA4RUR

Although my location wasn’t all that great, it was a fun activation this morning. 

72, Craig WB3GCK