Oops! It Lives!

I’m almost too embarrassed to even post this, but it looks like I resolved my issues with my Elecraft T1 ATU. I think it might have been a monumental example of “cockpit error.”

This morning, a few hours after my last post went live, I sat down and went back through the T1 user manual. One line jumped out at me:

When bypassed, the T1 can still show SWR; activate TUNE mode, then key the transmitter.

Hmmm… So, that got me thinking. That would explain the behavior I have been seeing: indicating SWR while not trying to find a match.

I went downstairs to the shack to check the T1 again. When I entered the pushbutton sequence to enter the BYPASS mode, the T1 actually toggled into the “ATU Inline” mode. DOH! I connected the T1 up to my KX3 and rain gutter antenna, and it tuned up like a champ. 

So, it looks like I might have accidentally put the T1 in BYPASS mode. Two errant presses of the push-buttons is all it would have taken. I’ll have to watch out for that, going forward.

Needless to say, I’m a happy boy again. Red-faced but happy.

72, Craig WB3GCK