Back in August I moved this blog over to a new hosting provider. The old site went off-line this morning, as planned except… I discovered that the migration didn’t go as smoothly as planned. Many of the older blog posts retained image links to the old site and some images just didn’t migrate over at all, for some reason. The net result is that many of the older blog posts have missing images.
I’m in the process of restoring the images and finished up the 2018 posts this morning. However, it’s a somewhat tedious process and will likely go on for another week or two. I still have more than two years worth of posts to check/fix.
So, if you go back through anything before 2018, you might run into this problem. Thanks for your patience while the site is being restored.
(Remind me again how computers make my like easier… HI HI)
73, Craig WB3GCK
[UPDATE 10/3/2018 – I finished restoring the images last night. If you come across any problems, be sure to let me know. — Craig WB3GCK]
My XYL and I took the “QRP camper” back down to Elk Neck State Park in Maryland for the weekend. We had a couple of days of nice Fall weather but that did little to offset the mediocre propagation. By the end of the weekend, the weather became as bad as the band conditions.
When we arrived on Friday I set up my usual 29.5-foot vertical. I initally gave some thought to putting up an inverted L but I didn’t see a conveniently-placed tree to support the far end. In hindsight, having more wire up in the air would have been a good idea this weekend. I made a couple of contacts to make sure things were working before getting a campfire started.
On Saturday, I worked an assortment of stations (SOTA, special events, SKCC, etc.) but it seemed like almost every QSO was a struggle. With an A Index of 27, that wasn’t too surprising. After several attempts, I finally got through to N8N in Michigan on 40M for a park-to-park contact. Hank N8XX was operating with a special event callsign for National Trails Day. He was operating from the North Country Trail (KFF-1555). (Elk Neck State Park is KFF-1569.)
The WB3GCK camper on a rainy morning in Elk Neck State Park in Maryland. My Jackite pole is strapped to the lantern post on the left.
The beautiful weather was short-lived. By Sunday morning, a steady rain had moved in, so I hunkered down with the KX3 in the camper to give the bands one more shot. I ended up with a very nice chat on 80M with NS3X. Mark is located in north-central Maryland and was a new SKCC number for my log. After I signed with Mark, I packed up the radio and began the unpleasant task of breaking camp in the rain.
I only logged a paltry 8 contacts over the weekend but that was enough to reach the 44 contacts needed for a WWFF-KFF activation.
We have two more trips planned for October before it’s time to winterize the camper and put it into hibernation until Spring. Time sure flies…
Our reservations for a weekend of camping at Pine Grove Furnace State Park (K/KFF-1398) in south-central Pennsylvania coincided nicely with the New England QRP Club‘s (NEQRP) QRP Afield contest. Although I didn’t hear much QRP Afield activity there was a lot going on this weekend, radio-wise.
We had a great campsite this time. It was large and isolated from our neighbor campers. Behind our site, there was nothing but woods. This site was screaming for a larger antenna. I put up a 53-foot inverted “L” antenna about 25 feet tall. I ran the horizontal section back into the woods and tied it off in a pine tree. It only took two attempts to get my line where I wanted it. I’m embarrassed to say I missed the tree completely on my first toss!
The WB3GCK QRP camper at Pine Grove Furnace State Park. If you look closely, you can see my antenna behind the picnic table. The white object is a plastic bag protecting the 9:1 unun from the rain we had on Friday night. The horizontal part of my inverted L runs back into the woods.
When I fired up the KX3 Friday night, the bands sounded great. I made several SKCC contacts, including KA4RUR out in Missouri. Fred is a retired Coast Guard Radioman and a fellow Field Radio member. I also had a nice chat with Jim WT2W in New York on 60M. Jim told me he was a Navy Radioman on a “tin can” (destroyer). It was great to work these fellow former military radio operators.
The next day, I set up outside the trailer and got ready for the contest. Unfortunately, there wasn’t much QRP Afield activity on the bands. I only worked two stations — W0UFO in Minnesota and W1C at the Chowdercon QRP gathering. I briefly heard another station but couldn’t connect.
WB3GCK operating at Pine Grove Furnace State Park.
Despite the lack of QRP Afield activity, there was plenty of other stuff going on to keep me occupied. I worked several stations in the Washington State Salmon Run, Iowa, and New Jersey QSO parties. I had park-to-park contacts with VE2DDZ (VEFF-0365) and K5KJ (K-3031) and also worked 3 SOTA stations — N0TA, KX0R, and AC1Z.
My favorite QSO of the weekend, though, was a two-way QRP chat with UR5FA/MM. I heard Oleg calling CQ on 30M and gave him a call. He was aboard a Ukranian cargo ship in the Atlantic, west of Gibraltar and bound for Canada. After chatting for a bit about our respective set-ups, I wished Oleg a safe voyage and he wished me an enjoyable camping trip. I was pleased to add UR5FA/MM to my log once again. That contact sure brought a smile to my face.
My XYL and I spent the weekend camping at Codorus State Park (K/KFF-1342) in south-central Pennsylvania. When we were here last year, we had a weekend of bad weather. This year, it was a tale of bad traffic, bad knees and bad propagation.
With a late start and heavy traffic, it was dark by the time we arrived at Codorus on Friday. After setting up the trailer it was getting late so I decided to wait until morning to set up my antenna. We were in a heavily-wooded camp site, so my antenna wound up surrounded by large trees.
My antenna at Codorus State Park. The trees helped to maintain a low profile but probably didn’t do much for its efficiency.
The day before we left for Codorus, I injured my knee and paid a visit to the local urgent care facility. The doctor said I needed to stay off of it for a few days and ice it several times each day. Following my doctor’s orders, I spent much of the weekend relaxing in my reclining camp chair with my KX3 on a table next to me.
Icing my injured knee while making contacts.
I didn’t do an announced activation at Codorus; instead, I just tuned around making contacts where I could find them. Along with some Ohio and Kansas QSO Party stations, I worked an interesting assortment of stations. On Sunday morning, I woke up to the news that there was a geomagnetic storm in progress. The dead bands confirmed that; I only managed a few more contacts over the rest of the weekend. Fortunately, I made more than enough contacts on Saturday for a qualifying POTA activation.
Here are some of the highlights:
I made park-to-park contacts with Joe N2CX at K/KFF-1461 and K/KFF-1452 in Wisconsin.
On Saturday afternoon, Ron WB3KVR answered my CQ on 40M. It turned out that Ron was also camping in Codorus and operating QRP. After we signed, I drove over to his campsite for an “eyeball QSO.” Ron stopped by my campsite the next day to see my set up.
On Saturday evening, I worked LZ1146SPS in Bulgaria on 30M. The unusual callsign is for a special event by the Bulgarian Radio Club Blagovestnik.
I wrapped things up on Monday morning with a contact on 30M with K0RU/M in Kansas City, Kansas. Rob was operating while driving to work. I’m always amazed by hams who can carry on a CW conversation while driving. Very impressive!
Although the bands could have been better, I still enjoyed my lazy weekend resting my ailing knee and playing around on the radio.
Bzzz… All that buzzing you heard on the bands on Sunday was the annual running of the NJQRP Skeeter Hunt contest. Happily, I got home from my recent vacation in time to join in the hunt.
The theme of this year’s contest was “water – the breeding ground for Skeeters!” In the spirit of the theme, I headed down to Upper Schuylkill Valley Park along the Schuylkill River near Royersford, Pennsylvania.
It had been raining all morning and it was drizzling when I got to the park and started setting up. Because of the inclement weather, I opted to operate from inside my truck. I put my usual 19-foot vertical on the back of the truck and fired up my KX3. I tested the rig on 40M by working a SOTA station in Vermont and a special event station in Illinois.
This was my view of the Schuylkill River during the Skeeter Hunt contest. This was taken shortly before it started raining again.
As I was operating, a fellow was curious about my antenna and walked over to ask about it. As I started to explain what I was doing, we both recognized each other. As it turns out, we were childhood friends and grew up less than a block away from each other. He happened to be visiting in the area and took his grand-kids fishing in the river. We hadn’t seen each other in more than 40 years, so we spent a half hour chatting and getting caught up. If he hadn’t been curious about my antenna, we never would have noticed each other. What an amazing coincidence!
My “stationary-mobile” set-up. My antenna attracted both skeeters and a long-lost childhood friend.
Back to the contest… I operated for about an hour and a half. There was some deep fading on the bands but 20M eventually seemed to open up a bit. I bounced between 40M and 20M, alternating between CQing and search & pounce. When it started raining again, I figured it was a good time to wrap things up. I ended up with 20 QSOs (18 skeeters) in 11 SPCs.
As always, the Skeeter Hunt was fun, even with the lousy weather. Thanks to Larry W2LJ and the NJQRP Club for once again putting on this great contest!
My family and I went on our annual vacation in Corolla on the Outer Banks of North Carolina. Ham radio-wise, it started off as a challenging week.
We arrived at the house we rented for the week after a long but fairly non-eventful drive. As we were unloading at the house, a storm rolled in. This delayed getting an antenna set up.
We were also visited by a security officer for the development we were in. Apparently, my daughter’s small cargo trailer was in violation of the Development’s rules. I won’t go further into that but, because of that drama, I decided to keep my antenna as low-profile as possible.
On Sunday afternoon, I finally got an antenna set up. I sloped a 29.5-foot wire down from a 3rd story deck to a wooden fence behind the house. It tuned up OK and I appeared to be getting out. Unfortunately, the local noise level was horrendous. Despite the high noise levels, I managed three quick contacts in the SKCC WES contest.
My Alexloop set up out on the deck.
On my second full day there, I used my Alexloop outside on the deck. It helped to make the noise situation more manageable on most bands. The 20M band was still a bit noisier than I would have liked, though. Even though we were only 2 blocks from the ocean, our rental house overlooked a scenic little lake. The struggle with the noise levels was at least partially offset by the great view I had.
My view from the 3rd story deck
On the third day, I removed the sloper and installed a 53-foot inverted L antenna. I mounted a 9:1 UNUN near ground level and ran the wire up the deck support. I ran the horizontal portion of the wire along the top rail of the deck. I estimate that the vertical portion was about 20 feet with the remaining 33 feet running horizontally. Surprisingly, the inverted L had significantly lower noise levels and seemed to be getting out pretty well. There was a picnic table conveniently-located near the antenna’s feed point, which provided a shady spot in the morning hours.
Operating from the picnic table. Above my arm, in the background, you can see the feedpoint for the inverted L antenna. My 9:1 UNUN is wrapped up for weather protection.
For the remainder of the week, I fell into a pattern of getting on the air each morning for a few QSOs. Most of my contacts were casual rag chews. It was nice to chat with a few familiar stations I haven’t worked in a while. The shade out there was usually gone by 1PM, so I limited my operating to the morning hours. The rest of the time was spent with the family and doing the usual things you would expect for a beach vacation.
It was a great vacation. This week was a perfect example of why I always like to bring several options for antennas. These rental houses are all different and sometimes you never know what you’re going to run into when you get here.
My (far) better half was going through some old pictures recently and came across some pictures of me operating while tent camping on a family vacation back in August 1993. After I studied the picture for a bit, it dawned on me that the old photograph had captured my first time operating QRP-portable.
Back in the early ’90s, I was just getting back on the air again after a long period of inactivity. I had a station at the house but what I really wanted was a portable QRP rig. I eventually purchased an MFJ-9030 QRP rig for 30M so I could take my hobby on the road.
Right around that time, we were getting ready to take a week-long vacation of tent camping on the Eastern Shore of Virginia. Wanting to take my new rig along, I hurriedly went about assembling a portable station. I bought a gel cell battery from a local hobby shop and threw together a 30M dipole. I wasn’t sure how much coax I would need so I used 50-feet of RG-8x, which, in hindsight, was overkill. Together with my old Radio Shack straight key, I packed everything in a small, waterproof container and placed it with the rest of the camping gear.
Being the detailed planner and organizer that she is, it took my wife no time at all to spot my container of radio gear. This prompted a stern reminder that this was a family vacation and no way was I going to spend all day on the radio and leave her to deal with the kids. Despite my assurances that I wouldn’t do that, she remained skeptical.
The day after we arrived and got our camp set up, I went about putting up my dipole. Because of the dense pine trees, my dipole only ended up about 15 feet up. I had to coil up the majority of my 50-foot coax at the base of a tree. Yep, my fifty feet of coax was definitely too long. (It was replaced with 30 feet of RG-174 when I got home.)
WB3GCK operating QRP-portable for the first time back in August 1993 at a campground on the Eastern Shore of Virginia
My log shows that I made my first-ever QRP-portable contact on August 15th with K3EEL (SK) up in northern Pennsylvania. I made 3 more QSOs before calling it a day. I only operated for about an hour but I was hooked!
I’m an early riser. The rest of my family… not so much. So, for the rest of the week, I fell into a routine of getting on the radio early in the morning, while the coffee was brewing on the camp stove. I usually got on again later in the afternoon while the kids were relaxing before dinner. My better half soon realized that my ham radio habit could peacefully coexist with the rest of the family’s activities. In fact, one lazy afternoon she said, “Why don’t you get on the radio for a while?”
I had a lot of fun that week, making 34 contacts. Since then, a QRP rig has gone along on every camping trip or vacation we have taken.
Here’s to the next 25 years of QRP-portable operating!
Flight of the Bumblebees (FOBB) has always been one of my favorite QRP contests. Although I didn’t think I was going to be able to participate this year, I managed to get in on the first hour or so of the contest.
My (far) better half and I took our “QRP camper” up to French Creek State Park (PA) for the weekend. I figured we would be packing up and heading home about the time FOBB started, so I never signed up for a Bumblebee number. We ended up packing up most of our stuff in the morning, leaving my ham radio equipment for last. So, I was able to get in a little operating time before we had to vacate our campsite.
The WB3GCK “QRP Camper” at French Creek State Park near Elverson, Pennsylvania. The Jackite pole supporting my 29-foot vertical wire can be seen on the right in the photo.
Without a Bumblebee number, I operated as a “Home” station, despite being portable. Although the bands seemed a little weak, my hour of work yielded 8 contacts, including 6 bumblebees. One of the highlights was working Ed WA3WSJ who was using the Boschveldt QRP Club callsign, W3BQC. Ed hiked up to Pulpit Rock on the Appalachian Trail for the event. Having operated as W3BQC during Field Day several times over the years, it was fun to be on the other end for a change.
Hopefully next year I’ll have more time to spend in the contest.
I made an impulse buy this week. After reading an old Elecraft mailing list post from Wayne Burdick N6KR where he made a strong recommendation, I ordered an MFJ-1820T whip antenna. I need another portable antenna like I need a hole in the head but I figured it might be fun to give this little whip antenna a try.
If you aren’t familiar with it, the MFJ-1820T is a 4-foot, telescopic, loaded whip for the 20M band. It collapses down to a tiny 10-inches. It will handle 25 watts but my whip will never see that much power. It sells for around $30 (U.S.). Wayne recommended using at least one 13-foot radial with it. I went with two 13-foot radials made from some cheap speaker wire I had on hand.
MFJ-1820T Collapsed
This morning, while operating from a local park, I connected the whip to my KX3 with a BNC right angle adapter. I connected my radials to one of the knurled nuts on the KX3 with an alligator clip. To keep the whip from swiveling, I used a small, plastic spring clamp.
The MFJ-1820T whip connected to my KX3. The plastic spring clamp was used to stabilize the whip. You can also see the alligator clip for the radials.
The KX3’s internal tuner loaded up the whip with no problems. I heard W8SVC calling CQ from Michigan and gave him a call with 5 watts. He got my callsign on the first call but he wasn’t sure he had copied it correctly. I upped my power to 10 watts (gasp!) and called again. He gave me a 559 and we exchanged our basic information. Unfortunately, I lost him when the band faded.
Moving up to the 20M QRP calling frequency, I called CQ a couple of times. AA8WQ (QRP at 5W) responded from Ohio and gave me a 569 report. Again, we were able to exchange our basic info before I lost him completely.
Frankly, I wasn’t really expected much from a 4-foot whip but I was surprised that I was able to make two contacts this morning. It certainly isn’t the best antenna for 20M but, when the band is in good shape and you need something that sets up in an instant, the MFJ-1820T is certainly a usable antenna. I’ll probably be carrying the MFJ-1820T in the field as a backup antenna.
I parked in a shady corner of a picnic area parking lot. I installed my 19-ft Vertical on the back of my truck and set up my KX3 on a small table under a large tree.
WB3GCK operating from Valley Forge
I started off calling “CQ SKCC” on 40M and received a call from K2K, a 13 Colonies special event station. The operator, AE1N in New Hampshire, is a fellow SKCC member, so we exchanged our membership numbers.
On 20M, I worked SKCC stations in Florida, North Carolina, and Wyoming. I also worked KX0R who was doing a SOTA activation (W0C/SR053) in Colorado. After that, I packed up and headed home to fire up the grill and crack open a cold “807” or two.
I’d like to wish my fellow U.S. hams a happy and safe 4th of July holiday.
Bzzz… All that buzzing you heard on the bands on Sunday was the annual running of the 
WB3GCK QRP Amateur Radio 