Whenever I go operate portable, I usually take my old YouKits HB-1B transceiver along as a backup. One thing I learned from back in my working days, is you need to test your backup equipment periodically to make sure it will actually work when you need it. It had been quite a while since I last used the HB-1B, so I put it to use today.
My destination today was Ridley Creek State Park (US-1414, KFF-1414). I rolled into one of my favorite spots and set up my homebrew loading coil paired with a 17-foot telescopic whip. This combination covers the 40M, 30M, and 20M bands, perfect for the HB-1B. Along with the HB-1B, I used my Elecraft T1 tuner and my old NorCal keyer.
The A Index was 32 when I started out on 40M. Despite the active geomagnetic field, my four-watt HB-1B still managed 10 contacts in about 16 minutes. The 30M band was a little better, but I made most of my contacts on 20M. The HB-1B only puts out a little over 3 watts on 20M, so I was pleased with that.
The (far) better half and I are puppy sitting one of our grand-dogs this weekend, and I received a text message that he was at the house waiting for me. He knows I’m the designated dog walker at our house, so I packed up to go spend some quality time with a furry buddy.
After operating for an hour, I logged 34 contacts. I didn’t have any DX contacts today, but four of my contacts were park-to-park.
I bought the HB-1B from Ten-Tec almost twelve years ago, and it has seen a lot of use in the field. Although it doesn’t see as much action as it used to, it proved once again it’s a capable little rig.
72, Craig WB3GCK
WB3GCK QRP Amateur Radio 