Among the Christmas gifts my XYL gave me was one that sums me up perfectly. She understands my love of coffee, and she is very supportive of my ham radio hobby. With this sweatshirt, I can proudly display both of my addictions.
I don’t have a link to the source, but my XYL says she found it on Amazon.
Happy Holidays!
73, Craig WB3GCK
During a recent outing, I had the pleasure of having a QSO with fellow Polar Bear QRP member, NJ7V. Charlie was doing a combined SOTA/POTA/Polar Bear activation, which he documented on his Red Summit RF YouTube channel.
Our QSO is included in his video, starting around the 11:30 mark. Despite the QSB and QRM, we managed to complete a POTA park-to-park contact. Of course, we also exchanged the traditional Polar Bear QRP greeting, “GRRR.”
If you’re into portable QRP operating, be sure to check out the Red Summit RF channel. You’ll lots of great videos out there. In particular, I’ve been enjoying the reviews in his Portable Morse Code Paddles Series. Good stuff!
72, Craig WB3GCK
I try to get out for some QRP-portable operation at least once each week. To get my fix this week, I made a trip down to Ridley Creek State Park (K-1414/KFF-1414).
It’s been about seven months since my last visit. Back then, I was recovering from knee surgery, and I got to hang out with someone’s pet pig.
This time out, I used my little TR-35 and my trusty 19-foot vertical. The bands seemed a little weak today. Nevertheless, I logged 45 contacts over the course of my 90-minute activation. I had one park-to-park contact, but no DX today.
Before I got started, I broke out my antenna analyzer to take a few measurements on the vertical. When I built the antenna over five years ago, I did the initial tweaking with it mounted close to ground with four ground radials. I knew that the resonant frequencies shifted significantly, when using the body of the truck for ground. Because of this, I have always used a tuner to keep my rig happy. I’m thinking about possibly building another one and optimizing it for use on the truck. Of course, after making tons of QSOs over the past five years with the current antenna, I guess there’s no real hurry.
I hope you all have a very happy and healthy holiday season.
73, Craig WB3GCK
I combined three activities into one outing today. The Polar Bear QRP Club was doing a Polar Bear Moonlight Madness Event (PBMME), and the SKCC Weekend Sprintathon (WES) started today. I planned to make some contacts in both, while doing a POTA activation.
The Polar Bear group traditionally schedules outings on the Saturday nearest a full moon. Rather than hold a separate on-air event, the Polar Bear ops are encouraged to conduct their usual portable operations (e.g. POTA, SOTA, picnic table portable somewhere, etc.) and give the other Polar Bears a heads-up so they can keep an ear out for them. The SKCC WES is held every month, and it just happened to coincide with the PBMME.
For today’s event, I chose to do a POTA activation at Marsh Creek State Park (K-1380). I used my Penntek TR-35 (CW @ 5W) and my 19-foot vertical. I operated from the West Launch parking area with a beautiful view of the lake. My plan was to call “CQ POTA” on each band for a while. Before changing bands, I planned to “search and pounce” looking for Polar Bears and SKCC stations.
After about two hours, I had 37 contacts in my log. I spent most of my time making POTA contacts, so I only made three SKCC QSOs. I found two Polar Bears on the air, however. NJ7V was doing a combined POTA and SOTA activation out in Arizona. I saw Charlie’s spot come up on the POTA website, so I called him on 20M. We had a “tuner-upper” on the frequency, but we got our park-to-park QSO done. I also had a park-to-park QSO with AE5X, another Polar Bear member. John was activating a park down in Florida. Altogether, I had ten park-to-park QSOs today.
I have to say this was a fun way to spend a chilly December morning.
72, Craig WB3GCK
During my last POTA activation, the eyelet at the top of my trusty 20-foot Black Widow telescopic pole snapped off. This pole has served me well for over 25 years, so I can’t blame the pole. The Black Widow poles are still available from the manufacturer, so I could have just bought a new one. But hey, what fun would that be?
After staring blankly at the broken pole for a while, I rummaged through my stash of parts and came up with an easy fix. I found a small ring terminal that fit snugly over the top of the pole, so I just glued it on using some Loctite outdoor adhesive. In keeping with my usual practice, I added a small key ring (split ring) to the eyelet replacement. (For more on the rationale for the split ring, check out this post.)
Well, that was easy enough. Hopefully, this silly little hack will squeeze 25 more years of use left in this old pole. It probably won’t, but a guy can dream, right?
72, Craig WB3GCK
I made a run down to the White Clay Creek Preserve (K-6433) for a POTA activation this morning. It’s been about a year since my last visit to this park. While I had a successful activation, it was not without some equipment issues.
After an hour-long drive, I rolled into a parking area near the park office. As I began setting up my homebrew vertical, the eyelet at the top of my Black Widow pole snapped off. This pole has seen heavy use over the past 25 years, so something like this was bound to happen sooner or later.
So, I rummaged around in the truck for something that would temporarily attach my antenna wire to the top of the pole. Searching through a plastic milk crate that I keep in the truck bed, I found something that would do the trick—a roll of duct tape. Unfortunately, this roll of tape has been in the truck bed for years through freezing cold and scorching heat. As a result, this sad-looking roll of tape was stuck fast to the bottom of the crate. With the help of a large screwdriver, I pried it loose. Eager to get on the air, I tore off a piece of tape and secured the antenna wire to the top of the pole.
With my antenna finally installed, I got started with my trusty TR-35 (5 watts). The bands didn’t seem very strong this morning, but the hunters still heard me. After a little more than an hour, I had 38 contacts, including five park-to-park QSOs. Up on 17M, I also heard from stations in Italy and Puerto Rico.
As I was taking the antenna down, things got interesting again. Remember that sad-looking duct tape? Well, it didn’t want to come off the antenna pole without a fight. With considerable frustration and a few choice words, I got the tape off of the pole. Unfortunately, my antenna wire (#26 stealth wire) incurred some damage in the process.
I guess I have a few repairs to add to my to-do list.
72, Craig WB3GCK
WB3GCK QRP Amateur Radio 